INV Inverter Family    

 DC input, AC output , 1200 and 2500 VA output power source

INV-1200 Inverter
These Inverters are designed for and used by the automated utility companies to provide a clean AC sine wave which powers their SCADA systems and power generation plant control systems. The INV inverter series is designed for the required reliability and demands of such an important task.

Output Power of 1200VA, 120Vac @ 10Amps, 60Hz.
Optional bypass to AC Line with Alarms available.

INV-1210 Inverter

INV-1210, modified sine wave output is a low cost solution to power loads normally considered difficult for inverters like switching power supplies, motors and non-linear loads. The INV-1210 modified sine wave output has both peak and RMS value equivalent to a sine wave

Modified Sine Wave output Inverters:

Pure Sine Wave output Inverters:

ACDC-1200 Inverter
This inverter is designed for and used by the utilities companies to provide a clean AC sine wave which powers their SCADA systems and power generation plant control systems. The ACDC series inverter is designed for the required reliability and demands of such an important task.

The ACDC inverter family provides the function of a True On-line UPS, but uses the batteries and charger present in the facility.

Can be set at the factory for either AC or DC Input preferred.

Output Power of 1200VA, 120Vac @ 10Amps, 60Hz.
Pure Sine Wave output Inverters:

SQ300 Family

DC input, AC output , 1200VA output power source

SQ300 Inverter

Behlman’s SQ300 Series is a rugged inverter that supplies 120 VAC from a 12 VDC source for continuous operation or standby operation of railroad signal equipment. 

The input is from a nominal 13.2 V lead acid or nickel cadmium battery, which should have a low internal impedance. The output is a square wave with a fixed frequency, 60 Hz, 100 Hz or 250 Hz, +/- 1% regardless of load, input voltage or temperature.